भारतीय मानक ब्यूरो
BUREAU OF INDIAN STANDARDS

विस्‍तृत परिचालन के आधीन मसौदा
Draft Under Wide Circulation

तकनीकी टिप्‍पणियों को प्रकाश में लाने हेतु निम्‍न मसौदा भारतीय मानक ब्‍यूरो द्वारा जारी किए गए हैं।  देश के भीतर इच्‍छुक दल इन मसौदा भारतीय मानकों के पाठ को  हाइपरलिंक पर क्लिक कर डाउनलोड कर सकते हैं या भारतीय मानक ब्‍यूरो, मानक भवन, 9 बहादुरशाह जफर मार्ग, नई दिल्‍ली 110002 पर संबंधित तकनीकी विभागों के निदेशक से मंगा सकते हैं। दस्‍तावेजोंटिप्‍पणियों हेतु विदेशी मांग WTO-TBT पूछताछ केन्‍द्र IRTIS विभाग भारतीय मानक ब्‍यूरो मानक भवन, 9 बहादुरशाह जफर मार्ग, नई दिल्‍ली 110002 पर भेजें

The following Draft Indian Standards have been issued for eliciting technical comments. Interested parties within the country can download the text of these Draft have copies of these Draft Indian Standards by clicking the hyperlink or ,on request from the Directors of the Technical Department concerned at Bureau of Indian Standards, Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi-110 002, India.

Overseas request for documents as well as comments should be sent to the WTO-TBT Enquiry Point, IR&TIS Department, Bureau of Indian Standards, Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110 002

Sl No Department Document No Title of the Doc ICS No. Last date for Comments
CED  CED 02 (13641) WC  Concrete Structures for Retaining Aqueous Liquids — Code of Practice : Part 4 Design Tables : Sec 1 Plates [First Revision of IS 3370 (Part 4)]  23.020.01; 91.010.30; 91.080.40  20-4-2019 
CED  CED 4 (13802)  Glass Fibre Reinforced Gypsum Building Panels – Specification  91.100.10  6-5-2019 
CED  CED 4 (13803)  Design and Construction of Buildings using Glass Fibre Reinforced Gypsum Panels – Code of Practice  91.100.10  6-5-2019 
CED  CED 2 (13830)WC  Hardened Concrete — Methods of Test : Part 5 Non-Destructive Testing of Concrete Section 2 Half-Cell Potentials of Uncoated Reinforced Steel in Concrete (First Revision of IS 516)  91.100.30  13-5-2019 
CED  CED 2 (13829)WC  Hardened Concrete — Methods of Test : Part 2 Properties of Hardened Concrete other than Strength Section 4 Determination of the Carbonation Resistance by Accelerated Carbonation Method (First Revision of IS 516)  91.100.30  13-5-2019 
CED  CED 2 (13831)WC  Hardened Concrete — Methods of Test : Part 5 Non-Destructive Testing of Concrete Section 3 Carbonation Depth Test (First Revision of IS 516)  91.100.30  13-5-2019 
CED  CED 2 (13832)WC  Hardened Concrete — Methods of Test : Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test (First Revision of IS 516)  91.100.30  13-5-2019 
CED  CED 2 (13833)WC  Hardened Concrete — Methods of Test : Part 8 Determination of Modulus of Elasticity Section 1 Static Modulus of Elasticity and Poisson’s Ratio in Compression (First Revision of IS 516)  91.100.30  13-5-2019 
CED  CED 2 (13828)WC  Hardened Concrete — Methods of Test : Part 1 Testing of Strength of Hardened Concrete Section 1 Compressive, Flexural and Split Tensile Strength (First Revision of IS 516)  91.100.30  13-5-2019 
10  CHD  CHD 25(13723) C  ANTIBACTERIAL TOILET SOAP-SPECIFICATION PART 2 LIQUID (First Revision of IS 11479)  71.100.40  22-3-2019 
11  CHD  CHD 20 (13774) C  IS 101 (Part 5/Sec 5) : XXXX ISO 6272-2:2011 METHODS OF SAMPLING AND TEST FOR PAINTS,VARNISHES AND RELATED PRODUCTS PART 5 MECHANICAL TESTS SEC 5 IMPACT RESISTANCE— FALLING-WEIGHT TEST, SMALL-AREA INDENTER  87.040  23-3-2019 
12  CHD  CHD 1 (13768) C  DRAFT AMENDMENT NO.3 TO IS 252 : 2013 CAUSTIC SODA — SPECIFICATION (FOURTH REVISION)  --  23-3-2019 
13  CHD  CHD 20 (13765)  IS 101 (Part 3/Sec 5) : XXXX ISO 1524 : 2013 METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS PART 3 TESTS ON PAINT FILMFORMATION SEC 5 DETERMINATION OF FINENESS OF GRIND (Fourth Revision)  87.040  23-3-2019 
14  CHD  CHD 20 (13774)C  IS 101 (Part 5/Sec 5) : XXXX ISO 6272-2:2011 METHODS OF SAMPLING AND TEST FOR PAINTS,VARNISHES AND RELATED PRODUCTS PART 5 MECHANICAL TESTS SEC 5 IMPACT RESISTANCE—FALLING-WEIGHT TEST, SMALL-AREA INDENTER (Fifth Revision)  87.040  23-3-2019 
15  CHD  CHD 36 ( 13769)C  METHODS OF SAMPLING AND TEST (PHYSICAL AND CHEMICAL) FOR WATER AND WASTE WATER Part 26 Chlorine, Residual (Second Revisions)  13.060.50  23-3-2019 
16  CHD  CHD 35 (10850) c  METHODS FOR MEASUREMENT OF AIR POLLUTION Part 5 Sampling of Gaseous Pollutants (First Revision)  13.040.20  23-3-2019 
17  CHD  CHD 10(12948)  Extra clear float glass - specification  81.040.20  23-3-2019 
18  CHD  CHD 20 (13761)C  IS 101 (Part 5/Sec 3) : XXXX ISO 6272-1:2011METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS PART 5 MECHANICAL TESTS SEC 3 IMPACT RESISTANCE—FALLING-WEIGHT TEST, LARGEAREA INDENTER (Fifth Revision)  87.040  23-3-2019 
19  CHD  CHD 25(13773)C  ANTIBACTERIAL TOILET SOAP -SPECIFICATION PART 1 : SOLID CAKE (Second Revision of IS 11479)  71.100.40  24-3-2019 
20  CHD  CHD 1 (13763.) C  LIQUID CHLORINE, TECHNICAL ―SPECIFICATION (Third Revision)  71.100.80  24-3-2019 
21  CHD  CHD 01(13771)C  Draft Indian Standard SODIUM ALUMINATE — SPECIFICATION (Second Revision of IS 4200)  71.100.80  24-3-2019 
22  CHD  CHD 01(13762)C  SPECIFICATION FOR FERROUS SULPHATE, EPTAHYDRATE ( Third Revision of IS 262)  71.100.80  24-3-2019 
23  CHD  CHD 01(13767)C  BORIC ACID― SPECIFICATION (Second Revision of IS 10116)  71.100.80  24-3-2019 
24  CHD  CHD 15 ( 13772 )C  PRINTING. PAPER, MAP – SPECIFICATION (First Revision of IS 12765)  13.100  24-3-2019 
25  CHD  CHD 01(13762)  Draft Indian Standard SODIUM ALUMINATE — SPECIFICATION (Second Revision of IS 4200)  71.100.80  24-3-2019 
26  CHD  CHD 08 (13224)C  IS……(Part 2) : 2018/ISO्16900-2: 2017 Respiratory protective devices — Methods of test and test equipment — Part 2: Determination of Breathing Resistance  13.340.30  19-4-2019 
27  CHD  CHD 08 (13231)C  IS……(Part 7) : 2018/ISO16900-7: 2015 Respiratory protective devices — Methods of test and test Equipment — Part 7: Practical Performance Test Methods  13.340.30  19-4-2019 
28  CHD  CHD 08 (13238)C  IS……(Part 10) : 2018/ISO16900-10: 2015 Respiratory protective devices — Methods of test and test equipment — Part 10: Resistance to Ignition, Flame  13.340.30  20-4-2019 
29  CHD  CHD 08 (13228)C  IS……(Part 6) : 2018/ISO16900-6: 2012 Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical Resistance/Strength of Components and Connections  13.340.30  20-4-2019 
30  CHD  CHD 08 (13222)C  IS……(Part 1) : 2018/ISO16900-1: 2014 Respiratory protective devices — Methods of test and test equipment— Part 1: Determination of inward leakage  13.340.30  20-4-2019 
31  CHD  CHD 08 (13226)C  IS……(Part 3) : 2018/ISO16900-3: 2012 Respiratory protective devices — Methods of test and test equipment — Part 3: Determination of Particle Filter Penetration  13.340.30  20-4-2019 
32  CHD  CHD 08 (13599)C  IS……(Part 11) : 2019/ISO16900-11: 2013 Respiratory protective devices—Methods of test and test equipment— Part 11: Determination of Field of Vision  13.340.30  21-4-2019 
33  CHD  CHD 08 (13235)  IS……(Part 9) : 2018/ISO16900-9: 2015 Respiratory protective devices — Methods of test and test equipment — Part 9: Determination of Carbon Dioxide Content of The Inhaled Gas  13.340.30  2-5-2019 
34  CHD  CHD 08 (13227)C  IS……(Part 5) : 2018/ISO16900-5: 2016 Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing Machine, Metabolic Simulator, RPD Headforms And Torso, Tools And Verification Tools  13.340.30  5-5-2019 
35  CHD  CHD 08 (13232)  IS……(Part 8) : 2018/ISO16900-8: 2015 Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement of RPD Air Flow Rates of Assisted Filtering RPD  13.340.30  5-5-2019 
36  CHD  CHD 08 (13603 )  IS……(Part 13) : 2019/ISO16900-13 : 2015 Respiratory protective devices — Methods of test and test equipment — Part 13  13.340.30  5-5-2019 
37  ETD  ETD 11(13590)  SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES – VENTED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS  29.220.99  23-3-2019 
38  ETD  ETD 11(13592)  STATIONARY LEAD-ACID BATTERIES – PART 22: VALVE REGULATED TYPES – REQUIREMENTS  29.220.20  23-3-2019 
39  ETD  ETD 11(13593)  SECONDARY CELLS AND BATTERIES – TEST METHODS FOR CHECKING THE PERFORMANCE OF DEVICES DESIGNED FOR REDUCING EXPLOSION HAZARDS – LEAD-ACID STARTER BATTERIES  29.220.20  23-3-2019 
40  ETD  ETD 11(13594)  GUIDE FOR THE USE OF MONITOR SYSTEMS FOR LEAD-ACID TRACTION BATTERIES  29.220.20  23-3-2019 
41  ETD  ETD 07 (13585)  Low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices (second revision)  --  23-3-2019 
42  ETD  ETD 11(13596)  SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES – SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS – PART 1: NICKEL-CADMIUM  29.220.30  23-3-2019 
43  ETD  ETD 11(13597)  SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES – SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS – PART 2: NICKEL-METAL HYDRIDE  29.220.30  23-3-2019 
44  ETD  ETD 11(13598)  SECONDARY LITHIUM-ION CELLS FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES – PART 4: CANDIDATE ALTERNATIVE TEST METHODS FOR THE INTERNAL SHORT CIRCUIT TEST OF IEC 62660-3  29.220.20  23-3-2019 
45  ETD  ETD 11(13595)  POSSIBLE SAFETY AND HEALTH HAZARDS IN THE USE OF ALKALINE SECONDARY CELLS AND BATTERIES – GUIDE TO EQUIPMENT MANUFACTURERS AND USERS  29.220.30  23-3-2019 
46  ETD  ETD 11(13591)  STATIONARY LEAD-ACID BATTERIES – PART 21: VALVE REGULATED TYPES – METHODS OF TEST  29.220.20  23-3-2019 
47  ETD  ETD 25 (12528)  Requirements Of Lifts For Differently Abled Persons (First Revision of IS 15330)  --  30-3-2019 
48  ETD  ETD 19 (13661)  Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC  --  1-4-2019 
49  ETD  ETD 44 (13669)  Safety of machinery – Electro-sensitive protective equipment – Part 3: Particular requirements for active optoelectronic protective devices responsive to diffuse reflection (AOPDDR)  --  4-4-2019 
50  ETD  ETD 44 (13668)  Safety of machinery - Application of protective equipment to detect the presence of persons  --  4-4-2019 
51  ETD  ETD 23 (13815)  Draft Amendment No. 6 To IS 15111 (Part 1) : 2002 Self Ballasted Lamps for General Lighting Services - Part 1 : Safety Requirements  --  12-4-2019 
52  ETD  ETD 19 (13778)  Guide for the Measurement of DC Electric-Field Strength and Ion Related Quantities  --  28-4-2019 
53  ETD  ETD 19 (13777)  Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields From AC Power Lines  --  28-4-2019 
54  ETD  ETD 21 (12841)  Resistance welding equipment: Part 2 Electromagnetic compatibility (EMC) requirements  --  14-5-2019 
55  ETD  ETD 21 (12688)R  Arc welding equipment - Part 7 : Torches  --  14-5-2019 
56  ETD  ETD 21 (12840)  Resistance welding equipment: Part 1 Safety requirements for design, manufacture and installation  --  14-5-2019 
57  FAD  FAD 28 (13736) C - 1  Infant formula and adult nutritionals — Determination of vitamin D by liquid chromatography mass spectrometry (Adoption of ISO 20636 : 2018)  67.050  22-3-2019 
58  FAD  FAD 28 (13737) C - 1  Food stuffs — Determination of water activity (Adoption of ISO 18787 : 2017)  67.050  22-3-2019 
59  FAD  FAD 28 (13735) C-1  Infant formula and adult nutritionals — Determination of vitamin C by (ultra) high performance liquid chromatography with ultraviolet detection ((U)HPLC-UV)(Adoption of ISO 20635 : 2018)  67.050  22-3-2019 
60  FAD  FAD 28 (13737)  Food stuffs — Determination of water activity (Adoption of ISO 18787 : 2017)  67.050  22-3-2019 
61  FAD  FAD 28 (13736)  Infant formula and adult nutritionals — Determination of vitamin D by liquid chromatography mass spectrometry (Adoption of ISO 20636 : 2018)  67.050  22-3-2019 
62  FAD  FAD 28 (13735)  Infant formula and adult nutritionals — Determination of vitamin C by (ultra) high performance liquid chromatography with ultraviolet detection ((U)HPLC-UV) (Adoption of ISO 20635 : 2018)  67.050  22-3-2019 
63  FAD  FAD 19 (13776)  Draft Amendment No. 2 to IS 13334 (Part 2) : 2014 Skimmed Milk Powder  Specification Part 2 : Extra Grade (First Revision)  --  10-4-2019 
64  FAD  FAD 19 (13775)  Draft Amendment No. 2 to IS 13334 (Part 1) : 2014 Skimmed Milk Powder  Specification Part 1 : Standard Grade (Second Revision)  --  10-4-2019 
65  FAD  FAD 19 (13827)  Draft Indian Standard Sterilized and Ultra High Temperature Processed Milk  Specification (First revision of IS 4238)  67.100.01  15-5-2019 
66  LTD  LITD 17(13569)  Information Technology — Security Techniques — Information Security Controls for the Energy Utility Industry  03.100.70  27-3-2019 
67  LTD  LITD 17(13570)  Information Technology — Security Techniques — Information Security For Supplier Relationships — Part 2: Requirements  35.040  27-3-2019 
68  LTD  LITD 17(13571)  Information Technology — Security Techniques — Information Security For Supplier Relationships — Part 4: Guidelines for security of Cloud Services  35.040  27-3-2019 
69  LTD  LITD 01 (13625)  Environmental testing- part 2 -78 : Tests- Test Cab : Damp Heat, Steady State (Second Revision)  19.040; 29.020  30-3-2019 
70  LTD  LITD 01 (13626)  Environmental testing- part 2 -75 : Tests- Test Eh : Hammer Tests (first Revision)  19.040  30-3-2019 
71  LTD  LITD 01 (13627)  Classification of Environmental conditions – Part 2-1 : Environmental Conditions appearing in nature – Temperature and humidity (first Revision)  19.040  30-3-2019 
72  LTD  LITD 01 (13628)  Classification of Environmental conditions – Part 2-3 : Environmental Conditions appearing in nature – Air Pressure (First revision)  19.040  30-3-2019 
73  LTD  LITD 01 (13630)  Fire Hazard testing- Part 11-5: Test Flames- Needle- Flame test method- apparatus, confirmatory test arrangement and guidance. (First Revision)  13.220.40; 29.020  30-3-2019 
74  LTD  LITD 19 (13752)  Information technology— Identification of privacy protection requirements pertaining to learning, education and training (LET) — Part 1 : Framework and reference model  03.100.30; 35.240.99  10-5-2019 
75  LTD  LITD 19 (13745)  Information technology for learning, education and training- Learning analytics interoperability — Part 1 : reference model  03.100.30; 03.180; 35.240.99  10-5-2019 
76  LTD  LITD 19 (13751)  Information technology for learning, education and training — Nomadicity and mobile technologies — Part 2 Learning Information model for mobile learning.  03.100.30; 35.240.99  10-5-2019 
77  LTD  LITD 19 (13750)  Information technology for learning, education and training — Nomadicity and mobile technologies — Part 1 Nomadicity reference model .  03.100.30; 35.240.99  10-5-2019 
78  LTD  LITD 19 (13749)  Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 3 : “Access for all” digital resource description.  03.100.30; 35.240.99  10-5-2019 
79  LTD  LITD 19 (13744)  Information technology for learning, education and training- Languages accessibility and human interface equivalencies (HIEs) in e-learning applications—part 1: Framework and reference model for semantic interoperability.  03.100.30; 35.240.99  10-5-2019 
80  LTD  LITD 19 (13747)  Information technology – Individualized adaptability and accessibility in e-learning, education and training — Part 1 : Framework and reference model.  03.100.30; 35.240.99  10-5-2019 
81  LTD  LITD 19 (13746)  Information technology for learning, education and training- Learning analytics interoperability — Part 1 : System requirements  03.100.30; 03.180; 35.240.99  10-5-2019 
82  LTD  LITD 19 (13748)  Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 2 : “Access for all” personal needs and preferences for digital delivery.  03.100.30; 35.240.99  10-5-2019 
83  MED  MED 08 (12504)WC  Draft Indian Standard on Cage Suspension Gear for Winding in Mines Part 1 General Requirements [Second Revision of IS 7587 (Part 1) : 2004]  73.100.40  25-3-2019 
84  MED  MED 06 (13427)  Draft Standard on Material Handling Ropeways — Code Of Practice (Second Revision of IS 9706)  45.100  31-3-2019 
85  MED  MED 06 (13065)  Draft standard on Continuous Movement Bicable/Multicable Ropeways With Detachable Grip — Code of Practice  45.100  31-3-2019 
86  MED  MED 06 (13199)  Draft Standard on Specification for Chairs for Chair lifts (IS 9228 : 2019)  97.220.20  31-3-2019 
87  MED  MED 06(13572)  Draft Standard on Acceptance and certification criteria for design and construction of all types of ropeways intended for transportation of passengers  93.110  31-3-2019 
88  MED  MED 06 (13573)W  Operation and maintenance of all types of ropeways intended for transportation of passengers — Code of practice  93.110  31-3-2019 
89  MED  MED 18 (13507)  Draft standard on concrete delivery pipeline : Part 1 Specification [First revision of IS 15947 (Part 1)]  77.140.75; 91.100.30  30-4-2019 
90  MHD  MHD 05 (13753)  Ophthalmic Instruments - Ophthalmometers  11.040.70  27-3-2019 
91  MHD  MHD 21 (13433)  Draft Indian Standard – Sharps injury protection - Requirements and test methods - Sharps containers - Single Use [ICS 11.040.99]  11.040.99  27-3-2019 
92  MHD  MHD 21 (13393)  Draft Indian Standard - Non-Chlorinated Plastic Bags for Storing and Transporting Bio-Medical Waste – Specification [ICS 55.080; 83.080.20]  55.080; 83.080.20  27-3-2019 
93  MHD  MHD 09 (13786)  IS/ISO 8669-2: 1996 Urine collection bags - Part 2: Requirements and test methods [ICS 11.180]  11.180  5-4-2019 
94  MHD  MHD 09 (13787)  IS/ISO 22523 : 2006 External limb prostheses and external orthoses — Requirements and test methods [ICS 11.040.40]  11.040.40  5-4-2019 
95  MHD  MHD 09 (13788)  IS/ISO 22675: 2016 Prosthetics — Testing of ankle-foot devices and foot units — Requirements and test methods [ICS 11.040.40]  11.040.40  5-4-2019 
96  MSD  MSD 13 (13531)  Recreational Diving Services- Requirements for Gas Blender Training Programmes  03.080.30; 03.200.00  25-3-2019 
97  MSD  MSD 13 (13535)  Tourism and Related Services – Tourist Services for Public Use Provided by Natural Protected Areas Authorities - Requirements  03.080.30; 03.200  25-3-2019 
98  MSD  MSD 13 (13528)  Recreational Diving Services- Requirements for Introductory Programmes to Scuba Diving  03.200.99; 03.080.30  25-3-2019 
99  MSD  MSD 13 (13536)  Adventure Tourism – Good Practices for Sustainability – Requirements and Recommendations  13.020.20; 03.200.10  25-3-2019 
100  MSD  MSD 13 (13532)  Tourism and Related Services – Guidelines on Developing Environmental Specifications for Accommodation Establishments  13.020.01; 03.200  25-3-2019 
101  MSD  MSD 13 (13527)  Recreational Diving Services – Requirements for Training Programmes on Enriched Air Nitrox (EAN) Diving  03.080.30; 03.200  25-3-2019 
102  MSD  MSD 13 (13530)  Recreational Diving Services – Requirements for the Conduct of Snorkelling Excursions Excursions  03.080.30; 03.200  25-3-2019 
103  MSD  MSD 13 (13534)  Tourism and Related Services – Wellness Spa – Service Requirements  03.080.30; 03.200  25-3-2019 
104  MSD  MSD 12 (13810)  Facility Management – Management Systems- Requirements with guidance for use  03.080.10; 03.100.70  15-5-2019 
105  MTD  MTD 19 (11426)W  Amendment No. 1 to IS 5429:2013 Dimensions for Steel Tubes for Automotive Purposes (Second Revision)  --  28-3-2019 
106  MTD  MTD 10 (11749) W  Amendment No. 1 to IS 1417 : 2016 Gold and Gold Alloys, Jewellery/Artefacts – Fineness and Marking – Specification (Fourth Revision)  --  28-3-2019 
107  MTD  MTD 15(11337) W  Methods of Testing Refractory Ramming Masses (First Revision of IS 10047)  --  6-4-2019 
108  MTD  MTD 15(13606)  Determination of density & porosity for granular materials  --  6-4-2019 
109  PCD  PCD 9 (13719) C  AMENDMENT NO. 1 Feb 2019 TO IS 2302 :1989 TABLES FOR ALCOHOLOMETRY BY HYDROMETER METHOD ( First Revision )  --  21-3-2019 
110  PCD  PCD 13(13755) C  WIRE REINFORCED RUBBER COVERED HYDRAULIC HOSE – SPECIFICATION  --  28-3-2019 
111  PCD  PCD 06(13633)C  Determination of Apparent Viscosity of Bituminous Binders at Elevated Temperature by Rotational Viscometer  91.100.50, 93.080.20  30-3-2019 
112  PCD  PCD 06(13658)C  Methods for testing tar and bituminous materials − Ageing of bitumen (RTFO and PAV tests)  91.100.50, 93.080.20  2-4-2019 
113  PCD  PCD 29(13800) C  Methods of Test for Vulcanized Rubbers – Part 21 : Determination of Permeability to Gases - Constant Pressure Method (First Revision)  --  4-4-2019 
114  PCD  PCD 29(13790) C  Methods of Test for Vulcanized Rubber Part 9 Rubber, Vulcanized ─ Determination of Density (Third Revision)  --  4-4-2019 
115  PCD  PCD 29(13789) C  Methods of test For Vulcanized Rubbers Part 5 Adhesion of Rubbers to Textile Fabrics (Third Revision)  --  4-4-2019 
116  PCD  PCD 29(13798) C  Methods of test for Vulcanized Rubbers: Part 14 Adhesion of Rubber to Rigid Material Section 3 Using conical shaped parts (Second Revision)  --  4-4-2019 
117  PCD  PCD 29(13797) C  Methods of test for Vulcanized Rubbers: Part 14 Adhesion of Rubber to Metal Section 2 Two-plate method (Second Revision)  --  4-4-2019 
118  PCD  PCD 29(13796) C  Methods of test for Vulcanized Rubbers: Part 14 Adhesion of Rubber to Rigid Substrate Section 1 90° peel method (Second Revision)  --  4-4-2019 
119  PCD  PCD 29(13801) C  Rubber ─ Standard Temperatures, Humidities and Times for the Conditioning and time interval between vulcanization and testing of test pieces (First Revision of IS 13867)  --  4-4-2019 
120  PCD  PCD 29(13795) C  Methods of test for vulcanized rubbers : Part 13 Tension Set (Second Revision)  --  4-4-2019 
121  PCD  PCD 29(13794) C  Methods of test for vulcanized rubbers : Part 12 Tear strengthcrescent test piece (First Revision)  --  4-4-2019 
122  PCD  PCD 29(13793) C  Methods of Test for Vulcanized Rubbers Part 10 Compression Set Section 2 At low temperatures (Second Revision)  --  4-4-2019 
123  PCD  PCD 29(13791) C  Methods of Test for Vulcanized Rubbers Part 10 Compression Set Section 1 At ambient or elevated temperatures (Second Revision)  --  4-4-2019 
124  PCD  PCD 29(13799) C  Methods of test for Vulcanized Rubbers : Part 19 Permeability to gases (constant volume method) (First Revision)  --  4-4-2019 
125  PCD  PCD07(13684)C  CRUDE COAL TAR FOR GENERAL USE (Third Revision of IS 212)  75.140  15-4-2019 
126  PCD  PCD 3 (13784 ) C  Paraffin Wax - Specification (Third Revision of IS 4654)  75.040  5-5-2019 
127  PGD  PGD 21(13653)W  AMENDMENT NO. 1 to IS 5225 : 1992 METEOROLOGY — RAINGAUGE, NON-RECORDING -SPECIFICATION (First Revision )  --  31-3-2019 
128  PGD  PGD 13 (13355)  Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters(Adoption of ISO 3547-2 : 2017 Second Revision of IS 4757)  21.100.10  15-4-2019 
129  PGD  PGD 13 (13356)  Plain bearings — Wrapped bushes — Part 3: Lubrication holes, grooves and indentations (Adoption of ISO 3547-3 : 2017 Second Revision of IS 4757)  21.100.10  15-4-2019 
130  PGD  PGD 13 (13360)  Plain bearings — Wrapped bushes — Part 7: Measurement of wall thickness of thin-walled bushes (Adoption of ISO 3547-7 : 2007 Second Revision of IS 4757)  21.100.10  15-4-2019 
131  PGD  PGD 13 (13359)  Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter (Adoptionbof ISO 3547-6 : 2007 Second Revision of IS 4757)  21.100.10  15-4-2019 
132  PGD  PGD13 (13352)  Plain bearing ─Thin-walled half bearings with or without flange ─ Part 3: Measurement of peripheral length (Adoption of ISO 3548-3 : 2012 as IS 4774-3 : )(Superseding IS 11145 : 2002)  21.100.10  15-4-2019 
133  PGD  PGD 13 (13358)  Plain bearings — Wrapped bushes — Part 5: Checking the outside diameter (Adoption of ISO 3547-5 : 2007 Second Revision of IS 4757)  21.100.10  15-4-2019 
134  PGD  PGD 13 (13357)  Plain bearings — Wrapped bushes — Part 4: Materials (Adoption of ISO 3547-4 : 2017 Second Revision of IS 4757)  21.100.10  15-4-2019 
135  PGD  PGD13(13354)  Plain bearings — Wrapped bushes — Part 1 : Dimensions (Adoption of ISO 3547-1 : 2018 Second Revision of IS 4757)  21.100.10  15-4-2019 
136  PGD  PGD 21(13654)  AMENDMENT NO. 2 to METEOROLOGY — RAINGAUGES RECORDING – SPECIFICATION ( First Revision )  --  15-4-2019 
137  PGD  PGD 21(13644 )  Air quality — Meteorology — Siting classifications for surface observing stations on land (adoption of ISO 19289 : 2015)  07.060  30-4-2019 
138  PGD  PGD 35(13446)  Thermal cutting -- Classification of thermal cuts -- Geometrical product specification and quality tolerances (Adoption of ISO 9013:2017)  25.160.10  15-5-2019 
139  PGD  PGD 35(13471)  Machine tool spindles -- Evaluation of spindle vibrations by measurements on non-rotating parts -- Part 2  25.080.01  15-5-2019 
140  PGD  PGD 35(13457)  Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 2: Measurement of static and dynamic accuracy (Adoption of ISO 15616-2:2003)  25.160.30  15-5-2019 
141  PGD  PGD 35(13458)  Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 3: Calibration of instruments for measurement of gas flow and pressure (Adoption of ISO 15616-3:2003)  25.160.30  15-5-2019 
142  PGD  PGD 35(13459)  Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 4: Machines with 2-D moving optics (Adoption of ISO 15616-4:2003)  25.160.30  15-5-2019 
143  PGD  PGD 35(13464)  Machine tools safety -- Machining centres, Milling machines, Transfer machines -- Part 1: Safety requirements (Adoption of ISO 16090-1:2017)  25.080.01  15-5-2019 
144  PGD  PGD 35(13467)  Machine tools safety -- Presses -- Part 3: Safety requirements for hydraulic presses (Adoption of ISO 16092-3:2017)  25.080.01  15-5-2019 
145  PGD  PGD35 (13441)  Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle -- Testing of the accuracy (Adoption of ISO3190:1975)  25.080.40  15-5-2019 
146  PGD  PGD 35(13456)  Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 1: General principles, acceptance conditions (Adoption of ISO 15616-1:2003)  25.160.30  15-5-2019 
147  PGD  PGD 35(13470)  Machine tool spindles -- Evaluation of machine tool spindle vibrations by measurements on spindle housing  25.080.01  15-5-2019 
148  PGD  PGD 35(13465)  Machine tools safety -- Presses -- Part 1: General safety requirements (Adoption of ISO 16092-1:2017)  25.080.01  15-5-2019 
149  PGD  PGD 35(13478)  Machine tools — Safety — Turning machines (Adoption of ISO 23125:2015)  25.080.01  15-5-2019 
150  PGD  PGD 35(13481)  Machine tools -- Safety -- Electro-discharge machines (Adoption of ISO 28881:2013)  25.080.01  15-5-2019 
151  PGD  PGD 35(13445)  Acceptance conditions for copying attachments, integral or otherwise, for lathes -- Testing of the accuracy (Adoption of ISO 8956:1986)  25.080.10  15-5-2019 
152  PGD  PGD35(13447)  Test conditions for die sinking electro-discharge machines (die sinking EDM)--Testing of the accuracy -- Part 1: Single-column machines  25.120.40  15-5-2019 
153  PGD  PGD35(13448)  Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type)  25.120.40  15-5-2019 
154  PGD  PGD 35(13449)  Test conditions for wire electrical-discharge machines (wire EDM) -- Testing of the accuracy (Adoption of ISO 14137 : 2015)  25.080.99  15-5-2019 
155  PGD  PGD 35(13469)  Machine tools -- Numerical compensation of geometric errors (Adoption of ISO 16907:2015)  25.080.01  15-5-2019 
156  PGD  PGD 35 (13445)  Acceptance conditions for copying attachments, integral or otherwise, for lathes -- Testing of the accuracy (Adoption of ISO 8956:1986)  25.080.10  15-5-2019 
157  PGD  PGD 35(13468)  Machine tools -- Safety -- Sawing machines for cold metal (Adoption of ISO 16093:2017)  25.080.01  15-5-2019 
158  PGD  PGD35(13441)  Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle -- Testing of the accuracy (Adoption of ISO3190:1975)  25.080.40  15-5-2019 
159  PGD  PGD 35 (13446)  Thermal cutting -- Classification of thermal cuts -- Geometrical product specification and quality tolerances (Adoption of ISO 9013:2017)  25.160.10  15-5-2019 
160  PGD  PGD 35(13447)  Test conditions for die sinking electro-discharge machines (die sinking EDM)-- Testing of the accuracy -- Part 1: Single-column machines (cross-slide table type and fixed-table type) (Adoption of ISO 11090-1:2014)  25.120.40  15-5-2019 
161  PGD  PGD 35 (13448)  Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type) (Adoption of ISO 11090-2:2014)  25.120.40  15-5-2019 
162  PGD  PGD 35 (13449)  Test conditions for wire electrical-discharge machines (wire EDM) -- Testing of the accuracy (Adoption of ISO 14137 : 2015)  25.080.99  15-5-2019 
163  PGD  PGD 35(13442)  Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle -- Testing of the accuracy -- Part 1: Single column type machines (Adoption of ISO 3686-1:2000)  25.080.20; 25.080.40  15-5-2019 
164  PGD  PGD 35(13450)  Machine tools -- Environmental evaluation of machine tools -- Part 1: Design methodology for energy-efficient machine tools (Adoption of ISO 14955-1:2017)  25.080.01  15-5-2019 
165  PGD  PGD 35(13443)  Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle  25.080.20; 25.080.40  15-5-2019 
166  PGD  PGD 35(13451)  Machine tools -- Environmental evaluation of machine tools -- Part 2: Methods for measuring energy supplied to machine tools and machine tool components (Adoption of ISO 14955-2:2017)  25.080.01  15-5-2019 
167  PGD  PGD 35(13479)  Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools (Adoption of ISO 26303:2012)  25.080.01  15-5-2019 
168  TED  TED24(13725)W  Series 1 freight containers Specification and testing Part 5: Platform and platform-based containers (Adoption of ISO 1496-5 : 2018)  55.180.10  23-3-2019 
169  TED  TED 24 (13724) W  Series 1 Freight Containers — Specification and Testing - Part 2 Thermal Containers (Adoption of ISO 1496-2 : 2018) (Third Revision)  55.180.10  23-3-2019 
170  TED  TED 27 (12983) W  Battery operated vehicle – Requirements of traction batteries  43.120  24-3-2019 
171  TED  TED 6(12640)P  Draft Indian Standard IS 13942 (Part 1) Automotive Vehicles — External Projection - Performance Requirements For M1 Category of Vehicles  --  25-3-2019 
172  TED  TED 14 (13675) W  Aerospace — Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa  49.030.20  6-4-2019 
173  TED  TED 22 (13679) W  Industrial trucks─ Verification of stability ─ Part 1 : General ( Adoption of ISO 22915 -1 : 2016)  53.060  8-4-2019 
174  TED  TED 22 (13680) W  Industrial trucks ─ Verification of stability ─ Part 7 : Bidirectional and multidirectional ( Adoption of ISO 22915 -7 : 2016)  53.060  8-4-2019 
175  TED  TED 2 (13692) W  Internal combustion engine — Piston rings — Part 1: Vocabulary (First Revision of IS/ ISO 6621-1) (Identical adoption of ISO 6621- 1:2018)  43.060.10; 01.040.43  17-4-2019 
176  TED  TED 2 (13687) W  Reciprocating internal combustion engine — Vocabulary — Part 1: Terms for engine design and operation [Second Revision of IS 7451(Part 1)] (Identical adoption of ISO 2710-1:2017)  27.020; 01.040.27  17-4-2019 
177  TED  TED2(13716)W  Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations  17.160; 27.020; 29.160.40  19-4-2019 
178  TED  TED2(13717)W  Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets (First Revision of IS/ ISO 8528-5) (Identical adoption of ISO 8528-5:2018)  27.020; 29.160.40  19-4-2019 
179  TED  TED2(13721)W  Reciprocating internal combustion engine — Exhaust emission engines — Part 4: Steady-state and transient test cycles for different engine applications  27.020; 13.040.50  22-4-2019 
180  TED  TED 2 (13718) W  Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, rating and performance (First Revision of IS/ ISO 8528-1)  27.020; 29.160.40  22-4-2019 
181  TED  TED 2 (13720) W  Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design (First Revision of IS/ ISO 8528-7)  27.020; 29.160.40  22-4-2019 
182  TXD  TXD 04 (13604)  Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester  --  26-3-2019 
183  TXD  TXD04(13587)  Textile Floor Coverings — Consumer Information (First Revision of IS/ISO 6347)  --  26-3-2019 
184  TXD  TX 32 (13662)  TEXTILES - WATER PROOF MULTI PURPOSE RAIN PONCHO WITH CONVERTIBILITY AS BIVOUAC - SPECIFICATION  --  1-4-2019 
185  TXD  TXD 01 (13217)  Woven Fabrics — Distortion — Determination of Skew and Bow  --  1-4-2019 
186  TXD  TXD 36 (13792)  Draft Amendment No. 3 to IS 16111 : 2013 Elastic Bandage  --  6-4-2019 
187  WRD  WRD 24 (10946)C  Guidelines for Assessment of Environmental Health Impacts of River Valley Project  --  14-4-2019 

Template for Sending Comments

To see old WC documents please click here